X-Maxx 8S Monster Truck TSM 4WD RTR

Manufacturer: Traxxas
Manufacturer part number: 77086-4
Delivery date: 3-5 days    Other Shipping Options
$899.95
excluding shipping

Innovative New Features Include;
**Traxxas Velineon VXL8s ESC, voltage, current and temperature LEDs**
**High-current BEC output**
**Fuse protected battery direct power bus for future accessories**
**Max Duty Drivetrain with new high-strength steel gears**
**larger module ring and pinions, impact absorbing Cush Drive**
**larger diameter driveshafts and larger main bearings**
**Torque Biasing Center Drive improves front and rear power**
**distribution and is tuned to provide instant wheels-up punch off the line***
**Rear Wheelie Bar**


FEATURES
Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steering direction on loose dirt, concrete and even ice and snow. TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app Chassis: Composite nylon tub, modular design provides easy access
to critical components, lower front and rear skids and integrated nerf bars for front, rear and side impact protection, rear wheelie
bar Drive Four wheel shaft drive, Max Duty drivetrain with new high-strength precision steel gears, new ring and pinions use a larger
module and special alloys, new impact absorbing Cush Drive handles massive torque and replaces the slipper clutch new Torque-Biasing Center Drive with cast alloy construction is tuned for instant punch off the line, and improved front and rear power distribution
Brushless Motor: Velineon 1200XL 1200kV, 0.196" (5mm) diameter output, aluminum heat sink


Motor Mount: Cradle design eliminates flexing, keyed pins lock gear mesh in place
Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry ready receiver, BEC voltage and motor temperature sensors installed,
self righting button, built-in fail safe, can be equipped with the TQi Docking Base along with the iPhone, iPad or iPod touch* to create a graphical user interface for the vehicle Traxxas Link TQi Wireless Module required (not included)
Steering Servo: High-torque with aluminum heat sink, double shear bearing supported servo horn
Electronic Speed Control: Velineon VXL-8s 8S LiPo compatible Transmission; Single speed
Differentials: Sealed hardened steel bevel gear, oil filled, limited slip Battery Retention System: Integrated into chassis top brace for greater rigidity, eliminates body clips or hook and loop straps, adjustable for different batteries

Body: ProGraphix painted and trimmed Body Mount System: Quick one-hand body installation and removal, pivoting rear latch mechanism eliminates body posts and clips Suspension: Captured high-strength steel pins, double sheer connections,
adjustable roll center Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps shafts clean reducing seal wear
Shock Towers: Composite plastic construction, also serve as carrying handles and level supports when vehicle is placed upside down
Tires: Aggressive all-terrain tread 8 x 4 x 4" foam inserts
Wheels: 3.4 x 5.7 inches (87 x 145mm), 17mm hexes
Steering: Bellcrank
Bumpers: Front and rear composite plastic with impact cushions behind each bumper to soften blows and add to durability Ball Bearings: Sealed, full contact
Radio Box: Waterproof


INCLUDES
RTR X-Maxx 8S Truck with Brushless Motor, Radio, ESC, Painted Body,
Quick Start Guide and Maintenance Tools
REQUIREMENTS
Batteries: Two 4S LiPo 5000mAh or greater
Battery Charger: Compatible with selected LiPo batteries
AA Cells: For for transmitter
LiPo Charging Bag


SPECIFICATIONS
Vehicle;
Length: 29.84" (758mm)
Front Track: 22.26" (540mm)
Rear Track: 20.66" (525mm) distance from outer edges of wheels
measured side-to-side
Ground Clearance: 4" (102mm)
Weight: 19.1lbs (8.66kg)
Ride Height: 13.79" (350mm)
Overall Drive Ratio: 8.24
Wheelbase: 18.92" (480mm)
Shock Length: 7.4" (187mm)
Battery Tray Dimensions: 7.7 x 2 x 1.7" (197mm x 51.5mm x 44mm)
Body;
Length: 27.7" (705mm)
Width: 9.2" (234mm) behind front wheels, narrowest point
11" (279mm) at rear wheels, widest point
Height: 7.1" (180.3mm)


COMMENTS
Available in the following colors;
Blue, TRAD78BB
Red, TRAD78RR

For Replacement Ball Bearings use:
Qty. Size Location Order Qty. Bearing Set
2 15x24mm Steering Blocks 1 TRAC5105
2 20x27mm Steering Blocks 1 TRAC5181
2 17x26mm Front Drive Cups 1 TRAC5107
2 15x24mm Fr Pinion Gear 1 TRAC5105
1 12x18mm Fr Pinion Gear 1
8 5x11mm Steering 4 DTXC1547
2 15x24mm Rear Hub Carriers 1 TRAC5105
2 20x27mm Rear Hub Carriers 1 TRAC5181
2 15x24mm Rear Pinion Gear 1 TRAC5105
2 17x26mm Rear Drive Cups 1 TRAC5107
1 5x11mm Input Shaft 1 DTXC1547
2 6x13mm Input Shaft 1 DTXC1573
jxs 12/12/16
ir/jxs

Innovative New Features Include;
**Traxxas Velineon VXL8s ESC, voltage, current and temperature LEDs**
**High-current BEC output**
**Fuse protected battery direct power bus for future accessories**
**Max Duty Drivetrain with new high-strength steel gears**
**larger module ring and pinions, impact absorbing Cush Drive**
**larger diameter driveshafts and larger main bearings**
**Torque Biasing Center Drive improves front and rear power**
**distribution and is tuned to provide instant wheels-up punch off the line***
**Rear Wheelie Bar**


FEATURES
Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steering direction on loose dirt, concrete and even ice and snow. TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app Chassis: Composite nylon tub, modular design provides easy access
to critical components, lower front and rear skids and integrated nerf bars for front, rear and side impact protection, rear wheelie
bar Drive Four wheel shaft drive, Max Duty drivetrain with new high-strength precision steel gears, new ring and pinions use a larger
module and special alloys, new impact absorbing Cush Drive handles massive torque and replaces the slipper clutch new Torque-Biasing Center Drive with cast alloy construction is tuned for instant punch off the line, and improved front and rear power distribution
Brushless Motor: Velineon 1200XL 1200kV, 0.196" (5mm) diameter output, aluminum heat sink


Motor Mount: Cradle design eliminates flexing, keyed pins lock gear mesh in place
Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry ready receiver, BEC voltage and motor temperature sensors installed,
self righting button, built-in fail safe, can be equipped with the TQi Docking Base along with the iPhone, iPad or iPod touch* to create a graphical user interface for the vehicle Traxxas Link TQi Wireless Module required (not included)
Steering Servo: High-torque with aluminum heat sink, double shear bearing supported servo horn
Electronic Speed Control: Velineon VXL-8s 8S LiPo compatible Transmission; Single speed
Differentials: Sealed hardened steel bevel gear, oil filled, limited slip Battery Retention System: Integrated into chassis top brace for greater rigidity, eliminates body clips or hook and loop straps, adjustable for different batteries

Body: ProGraphix painted and trimmed Body Mount System: Quick one-hand body installation and removal, pivoting rear latch mechanism eliminates body posts and clips Suspension: Captured high-strength steel pins, double sheer connections,
adjustable roll center Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps shafts clean reducing seal wear
Shock Towers: Composite plastic construction, also serve as carrying handles and level supports when vehicle is placed upside down
Tires: Aggressive all-terrain tread 8 x 4 x 4" foam inserts
Wheels: 3.4 x 5.7 inches (87 x 145mm), 17mm hexes
Steering: Bellcrank
Bumpers: Front and rear composite plastic with impact cushions behind each bumper to soften blows and add to durability Ball Bearings: Sealed, full contact
Radio Box: Waterproof


INCLUDES
RTR X-Maxx 8S Truck with Brushless Motor, Radio, ESC, Painted Body,
Quick Start Guide and Maintenance Tools
REQUIREMENTS
Batteries: Two 4S LiPo 5000mAh or greater
Battery Charger: Compatible with selected LiPo batteries
AA Cells: For for transmitter
LiPo Charging Bag


SPECIFICATIONS
Vehicle;
Length: 29.84" (758mm)
Front Track: 22.26" (540mm)
Rear Track: 20.66" (525mm) distance from outer edges of wheels
measured side-to-side
Ground Clearance: 4" (102mm)
Weight: 19.1lbs (8.66kg)
Ride Height: 13.79" (350mm)
Overall Drive Ratio: 8.24
Wheelbase: 18.92" (480mm)
Shock Length: 7.4" (187mm)
Battery Tray Dimensions: 7.7 x 2 x 1.7" (197mm x 51.5mm x 44mm)
Body;
Length: 27.7" (705mm)
Width: 9.2" (234mm) behind front wheels, narrowest point
11" (279mm) at rear wheels, widest point
Height: 7.1" (180.3mm)


COMMENTS
Available in the following colors;
Blue, TRAD78BB
Red, TRAD78RR

For Replacement Ball Bearings use:
Qty. Size Location Order Qty. Bearing Set
2 15x24mm Steering Blocks 1 TRAC5105
2 20x27mm Steering Blocks 1 TRAC5181
2 17x26mm Front Drive Cups 1 TRAC5107
2 15x24mm Fr Pinion Gear 1 TRAC5105
1 12x18mm Fr Pinion Gear 1
8 5x11mm Steering 4 DTXC1547
2 15x24mm Rear Hub Carriers 1 TRAC5105
2 20x27mm Rear Hub Carriers 1 TRAC5181
2 15x24mm Rear Pinion Gear 1 TRAC5105
2 17x26mm Rear Drive Cups 1 TRAC5107
1 5x11mm Input Shaft 1 DTXC1547
2 6x13mm Input Shaft 1 DTXC1573
jxs 12/12/16
ir/jxs

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent